Connect Mesh App 2.0
FeedbackRoadmapAnnouncements

Suggest

Similar

No Sensor - Option should be added

 5    0
accepted
   

Temperature settings with figures

Feedback from Marius Nöther:
Temperature settings should be possible to enter with figures, not only slider. Was in the concept paper.

 4    1
completed

Touch controlling

Would be maybe interesting beside slide control of light power and color have also the option for quick set via touch point somewhere on the line.
 4    5
accepted
   
Julian Ebert
Thanks for your idea! We thought about it too, but tests showed that there are a lot of accidental touches when trying to scroll the view on small devices. Accidentally changing the brightness would be even more frustrating if you were in a dark room and accidentally set the brightness to 100% 😳.

I will keep your feedback in consideration so others can see and leave their opinions as well.

Szenen - vordefiniert

die vordefinierten Szenen steuern ALLE Leuchten im Netzwerk (egal welcher Raum oder Gruppe) - macht in meinen Augen keinen Sinn.
 3    0
accepted
   

Default Scenes

Add an “All Off”. When operating the app from the Scenes tab, this makes it easier to turn off everything.
 3    0
accepted
   

feat(ui): show keyboard immediately on re-naming view

Feedback from David Siepenkothen:
If I renamea light the keyboard is not automaticcally there, but it shoudl be to rename. I need an extra press on the field again to get the keyboard appear
 3    1
later

Preselection for new room is not overwritten

When I want to create a new room, it already says 'room'...
I just want to type but it does not overwrite...
So I have to delete 'room' before I can type...
This could be easier
 3    1
later

850.00.041 (WS) not working

Can not do provisioning of the wall switch...
With reset button.
Tried with old app, no issue of the switch
 3    3
in consideration
   
Julian Ebert
Good morning David! Thanks for your feedback. Could you please go into more detail in your future tickets? What steps have you tried that led to the error? What phone are you using? If possible you could enable debug logs in the settings and provide them. We will now try to reproduce the problem, but more information would always speed up the process 😊

App Crash while assigning Room to Remote

Alpha.11 S22 - repeatable error.
 3    3
accepted
   

Scenes

I set up three scenes. scene 1 TW only is a TW on eco 2W MB at 50% 2700k, scene 2 is mono on 6p MB a 50%, scene 3 is both lights on at 80% with TW at 5000k. On scene screen, if I select each scene in succession, it adds to the lights. so Sc1 is TW on, then if I press SC2, SC1 remains, but the mono light turns on. if I press SC3 the lights turn to 80%... but I suspect that the scenes are not overriding each other....
 2    7
accepted
   

Nimbus Luminaires Reset Process End Indication

apha.11 and inherent Firmware:
Indication (Flashing) for End of Reset Process (at the end of 8 Seconds) is missing.
 2    1
accepted
   

Add Instructions to Pages

Feedback from Anonymous:
At page for “Add Device” – there is no instruction to “tap device to set up”. No explanation on what the star in the top right corner is when adjusting the brightness level. On Devices tab, there is a “+ Add” yellow button at the bottom right – there is no advise what this was for . . . adding another port? After pressing, I learn it’s to add another device. After finishing adding devices there was nothing to tell me to add a scene or group.  I clicked on finish and was taken to the home owners screen.  How does the installer know to add groups or scenes?



 2    0
ideas

Scene steuert falsch

 2    2
accepted
   

RGB - Sättigung

Feedback from Dirk Praßer:
Bei RGB Leuchten ist eine Farbsättigung über die Fernbedienung nicht möglich.
 2    0
completed

Zen - identifier not working, status led constantly on, luminaire off

Feedback from Christina Pfriender:
The Zen can be added to my network.
First bug: Identifier is not working.
Second bug: Even though the app shows that the luminaire is "on", it stays off and the red status led keeps being red constantly.
 2    0
completed

No Sensor - Option should be added

Feedback from Marius Nöther:
 2    0
completed

Room kitchen is always created

Room "kitchen" is always created even if I don't selected the room in the beginning.

Samsung S22
Android 13
nightly.2739
 2    0
accepted
   

Keyboard not there

If I renamea light the keyboard is not automaticcally there, but it shoudl be to rename. I need an extra press on the field again to get the keyboard appear
 2    0
accepted
   

NBS Leuchten

Provisionierung von Zen, Modul Q oder Cubic dauert mehrere Minuten....

Im Vergleich mit IOS ist dies superlangsam....

 2    2
closed
   
Julian Ebert
Nothing we can do here, it's either full android stack or bad environment.

Nimbus luminaires

Feedback from Flo Schwab:
(nightly.3363)After successful provisioning: control screen is greyed out (luminaires not controllable) for several seconds (3-4sec). haven't seen this in previous versions.
Tested on Qfour, Cubic, Zen. Seems as Eco Boxes have the same issue (but not as prominent - because the controlscreen is not directly seen after provisioning)
 2    2
next

Wording not consistent

Feedback from David Siepenkothen:

Füge vs. Fügen SIe

zuerst ein Gerät vs. (zeitsteuerbares )
--> gibt es auch nciht zeitsteuerbares Geräte?

ein erstes Gerät vs. zuerst ein Gerät

alpha 15

 2    0
next

Namen Leuchten auch abfragen

beim hinzufügen von Geräten wird man nach einem Namen gefragt, jedoch nachdem man die Kanäle Meshbox belegt wird man nicht automatisch abgefragt ob man die Leuchte direkt benennen möchte, zumindest ein Hinweis wäre super, denn mit Namen wird es für den Nutzer deutlich übersichtlicher

 2    0
accepted
   

FW Wallswitch V2 - wake up not working at all

Wallswitch only possible to use after power loss. Wake up not working at all.
 2    3
accepted
   

Add Details to Scenes

When adjusting scenes, the summary of the devices intensity level is helpful . . . but for Tunable and RGB, the respective colors should also be shown in the summary. Otherwise, the only way to know what the specific light colors are is to going to the Edit mode and then press on each light individually. Also, there should be an easy way to adjust all of the devices intensity level and colors versus needing to adjust each light individually.

 2    1
accepted
   

850.00.951 U.S.Wall Switch

The initial 2 attempts to add the switch failed. On the 3rd attempt the switch was connected. I was able to program button 1 to control a room. When I tried to add the function of “tap tap”, the switch could not be found even though button 3 was continuously held down per the illustration. Closed the app and restarted, went to the same switch, and tried to program button 3 to a device, and the program directed “Press and hold the Remote Control’s middle button until a connection to the device is established” and again, the program just spins and the connection is not made. I was unable to program any additional buttons or gestures. I have a bug report but am unable to attach to this feedback.
 
Also attached is a screen shot . . . the program advises to press the “middle button” and then faintly scrolls a yellow on button 3. The program should advise to press button 3 and the illustration needs to be a darker color.

 2    1
accepted
   
Powered by 
ClearFlask