🆕 Features:

• Enable enocean during ota if available to allow fast setup afterwards
• Support for the new revision of the MBTW12/24 with reconfiguration

👾 Fixes:

• Show all devices that will have enocean disabled during update
• Easy pairing furniture switch sensor provisioner is not enabled
• Remove forget option for enocean switches (only deletable when connected)
• Disallow enabling enocean through the context menu if the device limit was reached
• All nodes are now time relays
• Allow scheduling for Wallcontroller & Dali Relay
• Account creation ToS navigation
• Easy Pairing comfort mode does not work on all buttons/channels
• Easy Pairing Knight Rider animation on RC is visible during scanning
• Enable opening app with connect files
• Provisioned MBETW4CS flashes when powered
• MBTW12 and MBTW24 use wrong modules in default configuration
• Lighting Pad EnOcean module is only enabled during pairing
• EnOcean buttons should work again

🆕 Features:

• bundle firmware version 5.0.1
• Allow enabling enocean during configuration
• Allow recovering failed configurations
• bundle firmware beta 2
• Firmware: Easy pairing support for FSSM/FSSB (with default sensor config)
• Firmware: Easy pairing+ for RC (channel selection, light type selection, no comfort function for color/temp change)
• Ledvance socket support fixed (Note: sockets don's support scenes)
• WSUS button 1 and 4 control group when using quick setup

👾 Fixes:

• Schedule creation fixed (needs device reprovisioning to repair publish config for models)
• Restore enocean buttons
• Make backup tied to network
• Time synchronization should work better between the nodes making schedules work in sync
• Reconfiguring a Furniture Switch Sensor works now
• Firmware: Battery powered devices not going to sleep
• Firmware: WS1: first button press is ignored when device is sleeping
• Restoring scenes for RGB and MW Lights now works correctly (Preset scenes now have correct value)
• Device state after restart should now be persisted for on off toggles

🆕 Features:

• Show wakeup screen for WS after ota (sometimes it falls asleep)
• Fix issue where quick setup will prevent later individual changes
• Fix lock devices
• Fix enocean individual settings
• Prevent ota screen going to sleep
• Allow connection to battery devices after 8s of scanning
• Update OTA progress view while provisioning
• Added connection snackbar to device, scene, schedule screens
• Clean up connection task better
• Migration of preset scenes is now fixed
• Esp devices now use correct version (0.4.2)
• Bundle FW RC Version

🆕 Features:

• Improved connection management
• Bundled firmware version 4.11.10-alpha.19.
• Now allows deleting devices in unmigrated networks during migration.
• Exposed information about low battery during migration.
• Improved handling of auto OTA task errors.
• Improved scene actuation progress screen according to type.
• Added retry toast, scene deletion progress, and scene error screen in the scene.
• Show loader for pending devices in the scene.
• Moved scanning for resettable devices out of debug settings.
• Updated the latest firmware for TCI devices.

👾 Fixes:

• Fixed an issue in step 3 of the migration process.
• Fixed an issue with network deletion and creation.
• Fixed an issue where the light temperature of mbetw4c devices was changing when adjusting brightness.
• Fixed an issue where the system would go into error state when losing connection during restore.
• Fixed an issue where the system would go to fatal on first idle during restore.
• Fixed an issue where checkboxes couldn't be selected.
• Resolved a problem with the header changing height after sensor review.
• The connection manager now correctly ignores the scanning state.
• Added missing padding in the settings header.
• Removed extra bottom insets in the input.
• Improved the appearance of the migration wake-up screen.
• Enforced default on/off values in vendor entries for actuators during migration.
• Corrected wall switch gestures.
• Improved network name updating.
• Fixed layout adaptation to font during onboarding.
• Improved auto OTA state cleanup.
• Replaced the back button handler for the error screen.
• Improved UI color selection and fixed a grey box issue on the re-name view.

🆕 Features:

• The app now maintains the connection after setup.
• The app now waits for a connection after you leave the import loading screen.
• Added a new feature to reset meshboxes without reset button
• The app now uses updated names for devices

👾 Fixes:

• Improved the way the app connects
• Fixed an issue where the app would keep searching indefinitely after importing a network file.
• Fixed a crash that occurred when editing schedules and adding an end time.

🆕 Features:

• Improved connection stability by enforcing service UUID for connection task
• Added button functionality to DALI devices
• Added migration check to device settings
• Improved device management by forgetting about nodes when forgetting device
• Improved modal properties for screens in iOS substacks
• Removed room control after import
• Prepared binding and restore only during migration
• Removed information about publish to "0000" address during migration
• Improved mesh-db model by storing binding
• Improved connection task and state printing
• Improved binding connection management
• Updated CloudServiceScreen to the latest design
• Added debug printing to restore task and updated auto config task
• Prepared retry mechanism for migration

👾 Fixes:

• Fixed issue with username and password capitalization
• Fixed missing menu items on iOS
• Fixed address storage order for EnOcean devices
• Fixed list items view in iOS for EnOcean devices
• Fixed delay for the motion sensor
• Fixed issues with cloud backup & sync during migration

🆕 Features:

• Prepare for migration step
• Support importing legacy networks
• Readonly mode for legacy networks
• Use multiple networks
• Sharing networks make it compatible with mesh standard apps
• iOS navigation more platform consistent
• Show device limits during group selection
• Add network cloud management view
• Add option to remove network from cloud
• New firmware that is compatible with easy pairing
• Add preliminiary support for all lsc and mb esp variants
• Add room detail screen, room renaming
• Prepare cloud for handling 2.0 networks

👾 Fixes:

• Fix issue with WS configuration
• Fix another deletion bug on iOS
• Fix issue with deleting a device
• Fix importing legacy networks
• Fix importing mesh address on iOS
• Fix connection after import
• Fix up factory reset

🆕 Features:

• You can now toggle schedules on and off
• We've updated our logo colors and added it to the settings and onboarding sections
• You can now input lightness, temperature, and color values directly

👾 Fixes:

• We've improved the sensor settings to be more responsive
• We've improved the navigation views for device configuration
• You can now select dimmed, cozy light presets for groups
• Applying presets will now also trigger temperature and color values
• We've improved the contextual menu to be reopened after battery check
• We've improved the setting of scene buttons on remotes
• We've added missing German translations
• The skip button during iOS onboarding now works
• We've made it clearer that the sensor port can be skipped during configuration
• The identify function now aborts correctly when leaving the screen and works on iOS
• Remotes now use the new scene behavior
• Zen lights will now continue working after a firmware update
• Scene details in the list overview will now update after color/icon edition

🚨 IMPORTANT

🆕 Updates

🆕 Features:

• We've added a scheduling feature for iOS users
• We've launched the first version of scheduling for Android users
• We've included a new firmware that supports schedules
• We've integrated scheduling logic and views into the app
• We've added support for mesh 1 channel mono devices (esp)
• We've introduced experimental support for Steinel lamps
• We've added a favorites section to your dashboard

👾 Fixes:

• We've fixed an issue where scenes were being restored even when the device wasn't capable of doing so
• We've synchronized translations across the app
• We've made it possible to cancel schedule deletion if devices are not reachable
• We've fixed an issue with creating schedules for multiple devices on one meshbox
• We've fixed an issue with editing schedules with end times
• We've updated the colors for progress tasks
• We've added missing navigation to the device detail screen from favorites
• We've completed the provisioning flow on iOS and Android
• We've fixed the UI view of the account button in the settings header
• We've fixed navigation to the account overview after successful login/registration
• We've resolved some translation and minor UI issues
• We've fixed an error that occurred during binding